Level Up Insulation Co.

Level Up Insulation Co. customer review ratings and 4.8-star testimonial badges from Google reviews for Denver Colorado insulation services

Blown-In Insulation Arvada, CO

Expert blown in Insulation services for Arvada homeowners — free estimates, Xcel-rebate eligible

Servicing Arvada, Loveland, Boulder, Longmont & more.

1 Day

Most Projects Completed

99.97%

Particle Capture Rate

4.9★

Google Rating

$1,250+

Available in Rebates

Arvada Blown in Insulation | Level Up Insulation Co.

Arvada's most popular insulation upgrade — installed to Xcel Energy rebate standards, completed in one day.

Arvada homes built between the 1960s and 1990s share a costly flaw: wall cavities packed with nothing but stagnant air, creating thermal bypasses that drive heating bills higher every winter at 5,564 feet of elevation. Tearing out finished drywall to fix the problem isn’t practical — and it isn’t necessary. Dense-pack blown-in insulation installs through small drilled holes, filling wall cavities to settled density without disrupting your interior walls. Combined with proper air sealing and top-plate sealing, this approach eliminates attic air bypass paths and brings your home closer to the R-value performance that IECC Climate Zone 5 demands.

Across Arvada’s established neighborhoods, Level Up Insulation Co. upgrades wall and attic insulation using pneumatic blowing equipment calibrated for cellulose insulation and fiberglass loose-fill materials. As a licensed insulation contractor serving Jefferson and Adams counties, we handle everything from pre-installation assessment to Xcel Energy rebate paperwork — so your energy efficiency upgrade stays simple from start to finish.

Blown in cellulose at R-49 to R-60 depth by Level Up Insulation Co. in a Denver, Colorado attic with depth markers verifying Zone 5B compliance
Attic insulation installation using blown-in cellulose by Level Up Insulation Co., an Xcel Energy Registered Trade Partner providing insulation upgrades and rebate processing for Denver, Colorado homeowners.

Why Arvada

Why Arvada Homes Need Blown in Insulation

Arvada’s residential building stock spans a wide range of construction eras — 1960s ranch-style homes, 1970s split-levels, and 1990s two-story builds all sit across the city’s Jefferson and Adams County footprint. What these homes share is a common thermal weakness: wall cavities filled with minimal or degraded insulation, and attic floors well below the R-38 minimum required by IECC Climate Zone 5 standards. At 5,564 feet of elevation on the Front Range, Arvada’s heating degree days drive sustained energy demand from October through April, and under-insulated walls create thermal bypass pathways that attic insulation alone cannot solve. Dense-pack blown-in insulation installed through small drilled holes lets Level Up Insulation Co. upgrade finished wall cavities without tearing into drywall — delivering measurable R-value gains with minimal disruption to your living space.

This approach matters in Arvada because so many homes were built before modern energy codes required continuous thermal barriers. Loose-fill insulation — whether cellulose insulation with borate-based fire retardant or fiberglass loose-fill — fills irregular cavities, wraps around wiring and plumbing, and reduces thermal bridging through wood framing members. In the attic, pneumatic blowing equipment distributes material evenly across joists, around HVAC boots, and over top-plate sealing zones where conditioned air would otherwise escape. Combined with proper air sealing, blown-in insulation addresses the two biggest sources of energy loss in Arvada homes: conductive heat transfer through under-insulated assemblies and convective loss through attic air bypass points.

Arvada homeowners also benefit from active Xcel Energy rebate programs that offset a portion of insulation upgrade costs — making the investment in professional blown-in insulation installation more accessible. Level Up Insulation Co. handles rebate qualification documentation as part of every project scope, so you capture available incentives without extra paperwork.

Why Arvada

TYPES OF Blown-In INSULATION

Blown-In Insulation Options for Arvada Homes

  • Fiberglass Blown-In — Most common for attic floors, delivers uniform R-value coverage.
  • Cellulose Blown-In — Recommended for Arvada for superior air-sealing density.
  • Dense-Pack Wall Blown-In — Installed through drilled holes in existing walls.
  • Knee Wall Blown-In — Applied in 1970s/80s split-levels common in Arvada.

Fiberglass Blown-In Insulation

Cellulose Blown-In — Recommended for Arvada

Blown-In Insulation SERVICES

Where Level Up Installs Blown-In Insulation in Arvada

We’ve partnered with Wisetack to offer financing that customers actually love.

Blown in attic insulation by Level Up Insulation Co. in a Denver home with uniform cellulose coverage and proper baffle placement at the eaves

At 5,564 feet on the Front Range, Arvada homes face heating degree days that push furnaces hard from October through April — and most attics in the city don’t have enough insulation to handle it. Homes built during Arvada’s major growth periods in the 1970s and 1980s were typically insulated to R-19 or less, well below the R-38 minimum now required by IECC Climate Zone 5 standards.

Dense pack wall insulation by Level Up Insulation Co. in a Denver home blown through small access holes for R-13 to R-15 retrofit without drywall removal

Level Up Insulation Co. starts every Arvada project with a thermal assessment of your attic and wall cavities — measuring existing R-value, identifying thermal bypass points, and checking soffit baffle placement before recommending a material or depth.

Dense pack wall insulation by Level Up Insulation Co. in a Denver home blown through small access holes for R-13 to R-15 retrofit without drywall removal

The business case for blown-in insulation in Arvada starts with the Xcel Energy rebate program. As an Xcel Energy Trade Partner, Level Up Insulation Co.

Most Arvada Blown-In Insulation completed in one day

PROCESS

Blown-In Insulation Installation Process in Arvada

Blown-In Insulation Installation Process

step 1

Free Insulation Assessment

We measure existing R-value, inspect for air leakage opportunities, assess ventilation, and confirm Xcel Energy rebate eligibility.

step 2

Xcel Energy Pre-Approval

We provide the customer with necessary information for them to submit pre-approval for qualifying Arvada projects before scheduling installation.

step 3

Air Sealing

All attic floor penetrations, can lights, top plate gaps, and bypasses are sealed before any insulation is installed. Documented photographically.

step 4

Depth Gauge Installation

Small depth rulers placed at multiple points across the attic to ensure consistent coverage.

step 5

Machine Installation

Commercial-grade blowing equipment used to install material to the specified depth.

step 6

Depth Verification

Final depth measured and photographed at multiple points per Xcel Energy documentation requirements.

step 7

Full Cleanup

All hatch areas, stairways, and access points cleaned before we leave.

step 8

Rebate Submission

We provide the customer with the required information/documentation for them to submit to Xcel Energy for a rebate within 30 days.

Cost in Arvada, CO

Blown-In Insulation Cost in Arvada, CO

Blown-in attic insulation in Arvada is typically charged per square foot installed. A Arvada attic blown in insulation project with air sealing and cellulose blown-in can range in price depending on the materials used. Arvada homeowners often qualify for the Xcel energy rebate of $500-1,500.

The average Arvada homeowner saves $50–$150+ per Month (for the next 20+ years) in heating and cooling costs after a proper blown-in attic upgrade. At those savings, the net project cost pays back in 2–3 years. The insulation then delivers energy savings for the next 20+ years.

Trusted Products & Partners

Arvada's climate demands more from your insulation. Make sure it's up to the job.

Blown-In Insulation Arvada

Frequently Asked Questions

Common questions about our Blown-In Insulation

Arvada sits at 5,564 feet on the Front Range in IECC Climate Zone 5, where heating degree days drive significant energy demand from October through April. Blown-in insulation — whether cellulose insulation or fiberglass loose-fill — conforms to irregular joist cavities, wiring, and plumbing runs that are common in Arvada’s mix of 1960s–1990s housing stock. Dense-pack blown-in also allows wall cavity upgrades through small drilled holes without opening finished walls, making it ideal for homeowners who want improved R-value with minimal disruption. Paired with proper attic insulation and air sealing, blown-in delivers measurable energy efficiency gains year-round.

Most Arvada attic insulation projects using loose-fill insulation range from $1.50 to $3.50 per square foot installed, depending on target R-value, material choice, and attic accessibility. Bringing an under-insulated attic up to the recommended R-38 to R-60 range for Climate Zone 5 typically costs between $1,800 and $4,500 for an average home. Arvada homeowners served by Xcel Energy can take advantage of the Xcel Energy rebate program, which currently offers incentives for qualifying insulation upgrades — reducing your net investment. Level Up Insulation Co. handles rebate paperwork so you capture every available dollar.

Level Up Insulation Co. starts every Arvada project with a detailed inspection measuring existing R-value, identifying thermal bypass points, and checking soffit baffle placement. Before any loose-fill insulation is blown, our crew performs top-plate sealing and addresses attic air bypass gaps — critical steps that directly impact blown-in insulation performance. We then use calibrated pneumatic blowing equipment to install cellulose insulation or fiberglass loose-fill to the specified settled density and depth. Most attic projects are completed in a single day with no disruption to your living space. Learn more about our full Arvada insulation process.

If your attic insulation sits below the top of the ceiling joists — typically less than 10 inches — you’re almost certainly below the R-38 minimum recommended for IECC Climate Zone 5. Uneven temperatures between rooms, ice damming along roof edges, and heating bills that spike despite a functioning furnace all point to inadequate attic insulation or thermal bridging. Homes built before 2000 in Arvada frequently have settled or compressed loose-fill insulation that has lost R-value per inch over time. Schedule a free assessment with Level Up Insulation Co. — we measure existing depth, identify energy efficiency gaps, and provide a detailed scope before any work begins.

Still have questions?

Call, text, or schedule a free inspection.

Local Resources

Arvada Blown-In Insulation

Resources for Arvada homeowners planning a blown-in insulation project:

Xcel Energy Blown-In Insulation Rebates

Rebates of $300–$800 for qualifying Arvada attic insulation projects. Air sealing required for highest rebate tiers.

ENERGY STAR Insulation Guide — Colorado

R-value requirements and contractor verification for Colorado’s climate zone.

Cellulose Insulation Manufacturers Association

Technical resources on cellulose blown-in performance, sustainability, and installation standards.

GET A ESTIMATE

Ready to Upgrade Your Arvada Home's Insulation?

Free estimates — we respond within 24 hours. Xcel Energy rebate paperwork handled for you.

CO Contractor License #325117 · Fully Licensed, Bonded & Insured · BPI Certified

Get a Free Quote


We'll respond within 24 hours

This will close in 0 seconds